Ch 2 page 35 TRANSMISSION With the handle, pump and raise the cab. When lowering the cab, turn the direction valve to the downwards position and use the handle to lower the cab. Figure 23 Disconnect all hydraulic hoses (12 hydraulic hoses) and cab heating hoses (2 heater hoses) between cab / transmission and other frame components. CAUTION Mark position of all hoses and electrical connectors. Make sure you cover all open hydraulic fittings and open hose edges. Figure 24 Make sure that no electrical connectors from the rest of the truck are connected to the transmission. Figure 25 Lower the cab and then disconnect the tilt cylinder rod from the cab.
It is located on the left side, over the front left wheel. Figure 26 SHOP MANUAL