TRANSMISSION Ch 2 page 80 By means of the locating bush press clutch “A“ to the outside (see arrow) and remove it by means of a lifting tackle. CAUTION On mounting device I and II the marking of the clutch ist engraved on the respective locating bush. Remove all other clutches analogously. Figure 185 Housing II Insert the pressure piece into the bore to support the rapid grip and pull off the bearing inner ring by means of the rapid grip. (S) Rapid grip 850317-00072 (S) Pressure piece 850317-00073 (S) Basic tool 850316-00110 (S) Reducer K9006785 Figure 186 Remove the screen sheet (1). Figure 187 Unsnap the snap ring (1). Figure 188 SHOP MANUAL