Ch 2 page 85 TRANSMISSION By means of a mandrel drive the needle sleeve out of the disc carrier. Figure 203 In order to support the rapid grip, insert a suitable pressure piece into the bore and remove the bearing inner ring b means of the rapid grip. (S) Rapid grip 850317-00072 (S) Basic tool 850316-00110 (S) Reducer K9006785 Figure 204 Inner disc carrier is only to be removed if needed! Unsnap retaining ring (1) and press the inner disc carrier (2) out of the idler (3) under a hydraulic press. Figure 205 Unsnap and remove both rectangular rings (1). Figure 206 SHOP MANUAL