SECTION 1 OPERATION Page 16 STARTING SWITCH This switch is used to start or stop the engine. OFF Key insertion-withdrawal position None of electrical circuits activate. OFF The hazard lamp and the parking lamp will remain on, however, when the switch is turned OFF. : 04 To stop the engine, turn the switch to OFF. ON Charging and lamp circuits activate. Keep key at ON after starting START At this key position, the starting motor will crank the engine Release the key immediately after starting. and the key will return automatically to ON LAMP SWITCHES (for lamps. turn signal lamps. dimmer switch) Lamp switch Position 1 Parking lamp lights up. Positlon OFF 2 Lamps go off.
Position 3 Clearance lamps, tail lamps and machine monitor lighting light up Position 4 Head lamps light up in addition to the lamps in position 3 * The lamp switch can be operated regardless of the position of the lever. Turn signal lever This lever operates the turn signal lamps 1 LEFTTURN, Push lever FORWARD 2 RIGHT TURN, Pull lever BACK. * When the lever is operated the turn sional nilnt lamn will also light up * When the steering wheel is turned to the neutral position. the turn signal lever will return automatically to OFF. If not, return the lever to OFF manually