OPERATION SECTION 1 Page 29 CHECK AND REFILL COOLANT Open the engine side cover located on the left of engine hood, and apply the lock. Check the level of the coofant. The water levd must be between the FULL and LOW marks on sub-tank (1). If the level is too low. add water to sub-tank (1). a WARNING1 Do not open the radiator cap unless necessary. Check always the cool- ant level of the sub-tank when engine is cold. I - rl FULL If the volume of coolant added is more than usual, check for possible water leakage. 1 Never use a sealing additive to stop leaks in the coolant system. This can result in coolant system plugging and inadequate coolant flow.
Open the engine side cover located on the right of engine hood. and apply the lock. CHECK OIL LEVEL AND REFILL IN ENGINE OIL PAN Use dipstick (G) to check the oil level. The oil level should be between mark L and H, if necessary, add oil at oil filler (F). Never operate the engine with the oil level below the L mark or above the H mark. The type of lubricant used depends on the ambient temperature. Select according to the table “FUEL, COOLANT AND LUBRICANTS.” When checking the oil level, park the machine on a level surface and make an oil level check before starting engine or 5 minutes or more after the engine is stopped.