Page 2 BREAKING IN YOUR NEW MACHINE Each machine is carefully adjusted and tested before shipment. However, a new machine requires careful operation during the first 100 hours to break in the various parts If a machine is subjected to unreasonably hard use at the initial operation stage, the potential of performance will prematurely deteriorate and the service life will be reduced A new machine must be operated with care, particularly with regard to the following items. s After starting, let the engine idle for 3 to 5 minutes to allow proper engine warm-up prior to actual operation - Avoid operation with heavy loads or at high speeds .
Sudden starting or acceleration, unnecessarily abrupt braking and sharp turnmg should be avoided . At the first 250 hours of operation, the machine should be maintained in the following manner I” addi!lon to usual 250 hours service. 1) Replacement of transmission oil filter element * When replacing oil filter elements (cartridges), check their Interiors for dirt and dust If heavlly collected, check for possible cause before startmg operation. For replacement procedure and details, see maintenance table in the maintenance sectlon * Hours of operation are indicated by the service meter