SECTION 1 Page 34 OPERATION FAN DRIVE BELT - ADJUST Caution: Do not adjust belt tension to full value with the adjusting screw (I). Belt tension can increase when the lock nut (2) is tightened and cause reduced belt and bearing life. - Loosen the idler pulley shaft lock nut - Adfust the belt tension to b Used Belt 70-75 kg - Tighten the idler pulley shaft lock nut a New Belt 86-95 kg Torque Value: 166-194 kg m Measure the belt tension. Refer to the Belt Tension Chart for the correct gauge and tension values ALTERNATOR DRIVE BELT - ADJUST A 6 CHECKTHAT PARKING BRAKE WORKS PROPERLY. CHECK THAT BRAKES WORK PROPERLY.
C D CHECK THAT HORN SOUNDS PROPERLY CHECK THAT LAMPS FLASH PROPERLY, CHECK FOR DIRT OR DAMAGE E CHECK DIRECTION OF REAR VIEW MIRROR, CHECK FOR DIRT OR DAMAGE F CHECK THAT ENGINE EXHAUST GAS COLOR AND 1 SOUND ARE NORMAL G H CHECK THAT GAUGES AND INSTRUMENTS WORK PROPERLY CHECK STEERfNG PLAY, CHECK THAT STEERING WORKS PROPERLY I. CHECK THAT BACK-UP BUZZER SOUNDS PROPERLY J CHECK ELECTRICAL WIRING Check for any sign of disconnection or short cwcuit in the electric wiring Check also for loose tewwv.lS and tlghten any loose parts Check the following points carefully. - Battery - Starting rmtor . Alternator