SECTION 2 Page 20 MAINTENANCE 6. Tilt lever pin (1 point) 7. Steering cylinder pin (4 points) AIR CONDITIONER COMPRESSOR BELT 1. The belt tension should normally deflect by about 10 mm when pressed with the finger at a point midway between the air conditioner compressor pulley and the fan pulley (approx. 6 kg). 3. After adjustment, tighten bolt (1) securely. 2. To adjust the belt tension, loosen bolt (1) and shift compressor (2) slightly * When adjusting the V-belt, do not attempt to push compressor (2) directly with a bar or the like, but use a wood pad to prevent damage to the core. * Check each pulley for damage, and V-grooves and V-belt for wear.
Particularly, check whether V-belt is in contact with bottom of V-groove through wear. * Replace belt if it has stretched, leaving no allowance for adjustment, or of there is a cut or crack on belt.