SECTION 2 MAINTENANCE Page 24 6. Pour in the specified amount of engine oil from oil filter (F). 7. After refilling, check the oil level and ensure that it is correct. (Refer to WHEN REQUIRED.) * The type of lubricant used depends on the ambient temperature. Select according to the table “FUEL COOLANT AND LUBRICANTS”. * Refill capacity: 59/ * Check for oil leak at transmission case and filter. TRANSMISSION CASE BREATHER Remove all mud and dirt then remove the breather clean the breather. from around the breather, Put in cleaning fluid and LUBRICATING Apply grease to the grease fittings shown by arrows. 1. Center hinge pin (2 points)