35 POWERSHIFT TRANSMISSION RT95M REF NO. PART NUMBER QTY DESCRIPTION REMARKS SEE FOOTNOTE 3 & NOT SHOWN FOR SERVICE PARTS. 2. 159-509 - OIL FILTER 3. 106-383 12 FLG LK SCREW (M10-1.50 X 30mm) 1. 166-542 1 TRANSMISSION (2-SPD) 4. 166-519 1 TORQUE CONVERTER (1.93 NEEDLE) SEE FOOTNOTE 1 166-252 - DRIVE PLATE 5. 105-032 12 BOLT (3/8-NC X 3/4 ") SEE FOOTNOTE 1 6. 107-505 - BEVELED WASHER (M8) 7. 117-324 1 ABRASION SLEEVE (1.25" X 48") SEE FOOTNOTE 2 8. 166-193 - GROUND DRIVE TRANSMISSION 9. 306-971 1 RIGHT REAR TRANSMISSION MOUNT SEE FOOTNOTE 1 10. 306-972 1 LEFT REAR TRANSMISSION MOUNT 11. 105-386 4 BOLT (5/8-NC X 4-1/2") SEE FOOTNOTE 1 12. 116-151 4 SHOCK MOUNT 13. 105-416 4 WASHER (5/8") 14.
105-994 4 FLG LOCKNUT (5/8-NC) 15. 107-572 4 SCREW (M14-1.50 X 40mm) 16. 105-071 4 WASHER (1/2") 17. 149-790 2 S/O COUPLER (M22-1.50-10H90XL) 18. 116-044 AR BULK HOSE (5/8", SOLD PER 1") 19. 116-044 AR BULK HOSE (5/8", SOLD PER 1") SEE FOOTNOTE 1 USE 1@ 80" USE 1@ 70" 20. 149-811 1 S/O COUPLER (16S-10H) 21. 149-596 1 S/O COUPLER (16S-10H90) 22. 110-026 4 WORM CLAMP (1/2" TO 1-1/4") 23. 105-678 2 SCREW (M12-1.75 X 140mm, SOC) 24. 106-707 4 SCREW (M12-1.75 X 45mm, SOC) 25. 106-397 6 WASHER (M12, HARDENED) 26. 157-311 1 QDC ADAPTER (02-04H) SERVICE PART ONLY 27. 107-893 2 DOWELL PIN (16mm X 32mm) SERVICE PART ONLY 28. 117-691 1 ABRASION SLEEVE (1.25" X 68") NOT SHOWN:
500-1528 1 SHIFT SOLENOID 500-2076 1 CLUTCH KIT 500-2077 1 DISTRIBUTOR SEAL KIT 500-2078 1 TRANSMISSION GASKET KIT 500-2086 1 SEAL, REAR MAIN 111-151 1 TRANSMISSION DIPSTICK 213-293 1 TRANSMISSION TEMP SWITCH FOOTNOTES: 1. USE LOCTITE NO. 242 OR ITS EQUIVALENT 2. USE BEVELED WASHER TO PREVENT CRACKING DRIVE PLATE REF #4. 3. REPLACEMENT FOR INPUT SHAFT SEAL 500-2022. 4. APPLY NEVER SEIZE TO INPUT SHAFT SPLINES. REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS. NOTE: 06 ID0024289