SAFETY SAFETY FEATURES Be sure all guards and covers are in place especially after servicing the machine. Have guards or covers repaired immediately if they are damaged. See “PRECAUTIONS BEFORE STARTING WORK OPERATIONS” on page 1-8. Use safety equipment such as safety locks and seat belt properly. Never remove any safety features. Always keep them in good operating condition. Always secure the machine in a safe position: See “PARKING THE MACHINE” on page 2-50. Seat belt: See “INSIDE OPERATOR’S COMPARTMENT” on page 1-7. Improper use of safety features could result in serious bodily injury or death. Be sure the machine has the correct equipment required by local rules and regulations.
PERSONAL PROTECTIVE EQUIPMENT If your machine is equipped with safety equipment OSHA law requires this equipment to be used when operating your machine. Avoid loose fitting clothing, jewelry and loose long hair. These can catch on controls or in moving parts and cause serious injury. Wear a hard hat, safety glasses, safety shoes, mask or gloves when oper- ating or maintaining the machine. Always wear safety goggles, hard hat and heavy gloves, if your job involves driving pins with a hammer or cleaning the air cleaner element with compressed air. Check to be sure no one is near your work area. Check to be sure all personal protective equipment are in good condition before using.
UNAUTHORIZED MODIFICATIONS Any modification made without authorization from Komatsu can create a hazards. Before making any modifications, consult your local distributor. Komatsu will not be responsible for any injury or damage caused by any unauthorized modifications. WB140-2N, WB150-2N 1-3