SAFETY BATTERY PRECAUTIONS When working on the electrical system, disconnect the negative (-)bat- tery cable first then the positive (+) battery cable last. On completion of work, reconnect the positive (+) cable first then the negative (-) cable last. When using jumper cables to start the machine as shown below, hook the positive (+) jumper up first, then the negative (-) jumper last to a remote location on the chassis. STARTING THE MACHINE Never try to start the machine by tampering or shorting the starter termi- nals. Accidental movements of the machine could cause injury or even death. Always start the machine seated in the operators cab using the ignition switch.
See “BASIC TROUBLESHOOTING” on page 2-56. 1-16 WB140-2N, WB150-2N