OPERATION ENGINE COOLANT TEMPERATURE ALERT This warning light (8) comes on along with an audible alarm to alert the operator of an engine overheat condition. If this warning and alarm should come on, immediately stop the machine and select neutral gear. Let the engine run at about 1200 RPM until the warning and alarm stop. If this condition should occur again, check to make sure the radiator fins ar clean and free of debris. Do not continue to operate the machine if the engine is overheating. OPTIONAL EQUIPMENT ALERT This location is for any optional equipment warning indicators (9).
AUDIBLE WARNING SYSTEM When the ignition switch is on or the machine is in operation this audi- ble alarm (10) will sound if: The engine oil pressure is low The engine is overheating The transmission is overheating The charging system has failed REAR WORK LAMPS This switch (11) is for the operation of the rear work lamps. WINDSHIELD WIPER/WASHER SWITCH This switch (12) operates the rear windshield wipers and washer. The first position on the switch operates the wipers. The second position operates the washer. EMERGENCY FLASHING LIGHT SWITCH (If equipped) This switch (13) is for operating the rotating or flash- ing light mounted on top of the ROPS. WB140-2N, WB150-2N 2-13