UPPERSTRUCTURE / Pump Device CAUTION: Fan pump transmission weight: 28 kg (62 lb) 31. Install needle bearing (95) to transmission housing (98). 32. Install drive gear (96) to needle bearing (95) at the transmission housing (98) side. 33. Install needle bearing (95) and O-ring (94) to transmission cover (93). 34. Install transmission cover (93) to transmission housing (98) with socket bolts (92) (3 used). CAUTION: Fan pump weight: 51 kg (112 lb) 40. Hoist eyebolt in the fan pump and install the fan pump to transmission housing (98). Install the socket bolts (4 used). : 14 mm : 235 N m (24 kgf m, 175 lbf ft) : 14 mm : 240 N m (24.5 kgf m, 175 lbf ft) 35.
Install needle bearing (104) to relay gear (102). Insert retaining ring (106) into relay gear (102). 36. Install bearing spacers (112) (3 used) to relay gear (102). Install relay gear (102) to transmission housing (98). 37. Install O-ring (107) to shaft (108). Install shaft (108) to transmission housing (98). 38. Install retaining ring (109) to transmission housing (98). 39. Install O-ring (110) to front casing (76). Install transmission housing (98) to front casing (76) with socket bolts (100) (8 used). : 10 mm : 98 N m (10 kgf m, 72 lbf ft) W2-4-35