UPPERSTRUCTURE / Swing Device CAUTION: Swing device (9) weight: 230 kg (510 lb) 1. Install the bolts (M20, Pitch 2.5 mm) (2 used) to the hole (2 places) for cork (14). Attach a nylon sling onto the motor outer surface in swing device (9). 2. Rotate the bolt and raise off swing device (9) from the main frame. Hoist and remove swing device (9) from the main frame. Nylon Sling : 30 mm Installation 1. Apply liquid packing (THREEBOND #1215) to the mounting surface for main frame in swing device (9). Motor W155-02-06-012 9 CAUTION: Swing device (9) weight: 230 kg (510 lb) 2. Align the matching marks on main frame and the knock pin (15) position. Install swing device (9).
Tap and install knock pins (15) (2 used) to the main frame. NOTE: Other knock pin (15) is located diagonally. 3. Install swing device (9) to the main frame with bolts (11) (13 used) and washers (12) (13 used). Install new corks (14) (2 used) to the pulling-out hole. Install adapter (15). W1J1-02-06-002 : 32 mm : 750 N m (76.5 kgf m, 555 lbf ft) Adapter: PT1/2 : 50.5 N m (5 kgf m, 37 lbf ft) W2-6-2 14 1 11 12 13 14 5 11 1 5