UPPERSTRUCTURE / Engine CAUTION: Engine/pump weight: 1630 kg (3590 lb) 42. Attach a wire rope to the lifting hole (3 places) on engine. Hoist and remove the engine. IMPORTANT: Secure the wooden block in order to attach on the engine. Place the engine horizontally. Hold the engine in order not to fall down. 43. After placing the wooden blocks (300 mm Ч 600 mm, 11.8 in Ч 23.6 in) (2 used) under brackets (153) (2 used) at the engine radiator side and the wooden block (300 mm Ч 300 mm, 11.8 in Ч 11.8 in) under the pump device, place the engine. W1J1-02-14-016 153 Wooden Block Engine Wooden Block Position W1J1-02-14-017 W2-14-12 153 Liftin Liftin g Hole Wooden Block Lower Surface on