UNDERCARRIAGE / Center Joint Installation CAUTION: Center joint weight: 52 kg (110 lb) IMPORTANT: Align the matching marks made when disassembling. 1. Install the center joint to the track frame with bolts (17) (4 used) and spring washers (4 used). Center Joint 9 17 16 10 : 24 mm : 210 N m (21.5 kgf m, 154 Ibf ft) Track Frame 2. Install hoses (9 to 16) to the lower side of center joint. 15 : 22 mm 14 11 : 39 N m (4 kgf m, 29 Ibf ft) : 27 mm W16J-03-03-003 12 13 : 78 N m (8 kgf m, 58 Ibf ft) : 41 mm : 205 N m (21 kgf m, 152 Ibf ft) Machine Front 3. Insert the washer between stopper (7) and the spindle. Install stopper (7) to the spindle with bolts (8) (2 used) and spring washers (2 used).
Machine Front : 22 mm : 140 N m (14 kgf m, 101 Ibf ft) 7 8 1 2 4. Install hoses (3, 4) to the spindle. 6 : 27 mm : 93 N m (9.5 kgf m, 69 Ibf ft) : 19 mm 5. Install the adapters (4 used) to the upper side of spindle. Install hoses (1, 2, 5, 6) to the adapters (4 used). : 29.5 N m (3 kgf m, 21.5 Ibf ft) 5 3 W16J-03-03-002 4 Spindle : 41 mm : 205 N m (21 kgf m, 152 Ibf ft) IMPORTANT: After completing the work, check the oil level. Start the engine and check for any oil leaks. W3-3-2