33 FUEL TANK BEGINS WITH S/N CMWHT115 P60000014 REF NO. PART NUMBER QTY DESCRIPTION REMARKS NOT SHOWN: FOOTNOTES: 1. SPACER (300-2186) IS USED "AS REQUIRED" DURING ASSEMBLY TO ADJUST THE SPACE BETWEEN THE TANK AND THE PLASTIC FENDER. NOTE:
06 ID0141524 1 214-985 1 FUEL SENDER 2 106-506 5 BOLT (#10-24 X 3/4") 3 110-528 4 SNAP-ON CLAMP (.531" TO .593") 4 116-108 1 BULK HOSE (5/16", SOLD PER 1") USE 1 @ 53" 5 116-108 1 BULK HOSE (5/16", SOLD PER 1") USE 1 @ 83" 6 117-671 1 ABRASION SLEEVE (1" X 12") 7 156-269 1 S/O COUPLER (04H-05H90) 8 116-325 1 GROMMET (.362") 9 156-239 1 S/O SHUT-OFF (02N-05H90) 10 110-563 2 SPRING CLAMP (3/8") 11 118-096 1 BULK FUEL TUBING (1/4",PER FT) USE 1 @ 12" 12 111-046 1 LOCKING CAP (NON-VENTED) 13 111-021 1 BREATHER CAP (TANK) 14 194-505 1 FUEL PICKUP 15 106-709 14 FLG LK NUT (M12-1.75) 16 106-632 14 FLG LK SCR (M12-1.75X35MM,SER) 17 300-1384 1 FLANGE 18 106-387 4 FLG LOCKNUT (M10-1.50) 19 106-724 4 FLG SCREW (M10-1.50 X 25MM) 20 105-003 4 FLG LOCKNUT (5/16-NC) ATTACHES COVER TO STUD ON FRAME 21 300-1401 1 FUEL TANK WELDMENT 22 106-574 1 CLIP NUT (M6-1.00) 23 107-629 3 WASHER (M8) 24 106-640 1 SCREW (M6-1.00 X 20MM,BUT SOC) 25 107-778 2 SCREW (M8-1.25 X 30MM,BUT SOC) 26 106-386 2 FLG LOCKNUT (M8-1.25) 27 300-2689 1 TOOL BOX DOOR 28 105-650 8 SCREW (M4-0.70 X 10MM) 29 117-558 1 LATCH, ADJUST LEVER (LOCKING) 30 111-052 1 HINGE 31 111-051 1 HINGE 32 300-1390 1 TOOL BOX 33 115-152 1 PLUG (12N, SQ FM) 34 313-911 1 LEFT AIR DEFLECTOR 35 300-2186 1 SPACER REFER TO FOOTNOTE 1