1.1 CYLINDER BLOCK AND CYLINDER LINER 15. Connect a suitable lifting device to the engine using all three lifting brackets (two at the rear and one at the front). 16. Separate the engine from the transmission . 17. Remove the engine mounting bolts. FALLING ENGINE To avoid injury from a falling engine, an adequate lifting device with a spreader bar and sling should be used to lift the engine. The sling and spreader bar should be adjusted so the lifting hooks are vertical to prevent bending the lifter brackets. To ensure proper weight distribution, all provided lifter brackets must be used. 18. Lift the engine from its mounts using a suitable lifting device. See Figure 1-5.
Figure 1-5 Lifting Engine (Rev. 2005) All information subject to change without notice. 1-8 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION