1.2 CYLINDER HEAD 1.2.2 Removal and Cleaning of Cylinder Head Because optional and accessory equipment varies with the engine application, this procedure covers only the basic engine. If the engine is equipped with accessories that affect cylinder head removal, note the mounting details of each to assure correct installation at reassembly. Remove the cylinder head as follows: 1. Drain the cooling system. Refer to section 14.6.4. 2. Disconnect the exhaust pipe at the turbocharger. Refer to section 6.5.2. 3. Remove the air cleaner and charge air cooler ducting from turbocharger and intake manifold. Refer to section 6.2.2and refer to section 6.3.2. (Rev.
2005) All information subject to change without notice. 1-36 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION