SAFETY, NOISE AND VIBRATION PLATES 2.1 SAFETY, NOISE AND VIBRATION PLATES 2.1.1 POSITION OF THE SAFETY PLATES The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or grease, it is necessary to clean them with a solution made of water and detergent. Do not use fuel, petrol or solvents. If the plates are damaged, ask for new ones to Komatsu Utility or to your Komatsu Utility Dealer. In case of replacement of a component provided with a safety plate, make sure that this plate is applied also on the new part.
The machine can be provided with other plates in addition to those indicated below; in any case, keep also to the instructions given in the additional plates. 2.1.1.1 SAFETY PLATES RWA31660 RWA00030 18