SAFETY, NOISE AND VIBRATION PLATES 2.1.3 POSITION OF THE NOISE PLATES The noise plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or grease, it is ne- cessary to clean them with a solution made of water and deter- gent. Do not use fuel, petrol or solvents. If the plates are damaged, ask for new ones to Komatsu Utility or to your Komatsu Utility Dealer. In case of replacement of a component provided with a noise plate, make sure that this plate is applied also on the new part.
RWA31640 NOISE OUTSIDE THE CAB This value indicates the noise level outside the machine and re- fers to the noise perceived by the persons who are in the vicinity of the work area. L WA ( 89/514/CE - 95/27/CE ) RWA08570 NOISE INSIDE THE CAB This value indicates the maximum noise level perceived by the operatorнs ears inside the cab.
L p A ( 89/514/CE - 95/27/CE ) RWA23900 2.1.4 VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED According to the results of the tests carried out to determine the vibrations transmitted to the operator by the ma- chine, the upper limbs are subjected to vibrations lower than 2.5 m/sq.sec., while the seated part of the body is subjected to vibrations lower than 0.5 m/sq sec. 26