INFORMATION ON SAFETY DANGER Travel on roads is allowed only if the machine is provided with appropriate lighting, signalling and safety devices and properly authorized by the relevant papers. Before travelling on roads, make sure that the equipment installed on the machine is homologated and that the safety locks are correctly engaged. 3 • It is strictly forbidden to modify the setting of the hydraulic system safety valves; Komatsu Utility cannot be held liable for any damage to persons, property or the machine, if this has been tampered with by modifying the standard setting of the hydraulic system.
DANGER DANGER • Before carrying out any electrical welding, disconnect the battery and the alternator (see “2.8.13 PRE- CAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR”). DANGER DANGER • Install only authorized additional equipment (see “6.1.3 CHARACTERISTICS OF THE OPTIONAL EQUIP- MENT”). DANGER DANGER