FUSES AND RELAYS 3.4 FUSES AND RELAYS IMPORTANT When changing a fuse, make sure that the ignition key is in position « ». If the fuses are oxidized, corroded or do not fit perfectly in their seat, replace them only with new fuses having the same capacity. If the engine does not run when the ignition switch is brought to position « » STARTcheck the main fuse and if necessary change it. 3.4.1 MACHINE FUNCTION FUSES The fuses relevant to the machine functions are grouped on a single base positioned on the dashboard behind the seat.
RWA35800 STANDARD VERSION 96 1 2 3 4 9 10 11 5 6 7 8 POSITION COLOUR CAPACITY (A) INVOLVED CIRCUIT 1 Violet 3 Left parking lights 2 Violet 3 Control panel lights, (right parking lights) 3 Light blue 15 Horn, low beam or front working lights 4 Brown 7.5 Switch lights 5 Light blue 15 Rear working lights 6 Red 10 Power supply of joystick switches, floating device, pattern shifting 7 Red 10 12 V electric outlet, revolving light 8 Red 10 Power supply of control panel, safety unit, solenoid valve stop, control bar sensor, seat sensor, brake switch 9 Brown 7.5 Reverse alarm 10 Brown 7.5 Fuel pump, safety relay (against repeated starting), generator 11 Green 30 Solenoid pull relay, servo control safety pressure switch