9. POSITION FOR All-ACHING SAFETY LABELS 9. Warnings for adjusting track tension (09657-03000) 1. TO INCREASE TRACK TENSION, PUMP IN GREASE THROUGH LUBRICATOR. 2. TO SLACKEN IT, RELEASE GREASE BY ROTATING CAP ONE TURN. (FOR TRACK ADJUSTMENT PROCEDURE, READ OPERATION AND MAINTENANCE MANUAL.) CAP 3. DO NOT LOOSEN CAP MORE THAN ONE FULL TURN. ALSO BE CAREFUL NOT TO LOOSEN ANY OTHER PARTS THAN CAP. SINCE THE GREASE IS UNDER HIGH PRESSURE EXCESS LOOSENING IS HIGHLY DANGEROUS. 4. RETIGHTEN CAP SECURELY AFTER ADJUSTMENT. 10. Cautions for replacing hydraulic oil filter element (09655-30120) 12. Cautions for washing fuel strainer (09656-30080) CAUTION I .
AFTER THE FIRST 250 OPERATING HOURS, AND THERE- AFTER EVERY 1000 OPERATING HOURS, RENEW THE OIL IN THE HYDRAULIC TANK AND THE ELEMENT IN THIS FILTER. (SEE YOUR OPERATION AND MAINTENANCE MANUAL FOR DETAILS.) CAUTION l EVERY 250 OPERATING HOURS, REMOVE AND CLEAN THE STRAINER. ( SEE YOUR OPERATION AND MAINTE- NANCE MANUAL FOR DETAILS.) WHEN RENEWING THE ELEMENT: . REST THE WORK ATTACHMENT ON THE GROUND AND STOP THE ENGINE. I L 09656-30080 09655-30120 J T 1. Cautions for opening cap of hydraulic tank (09653-03000) l-24