Komatsu — Dust Hazard Precautions

SAFETY Fire coming from Electric Wiring Short circuits in the electrical system can cause fire. Always keep electric wiring connections clean and securely tightened. Check the wiring every day for looseness or damage to the wire insulation. Tighten any loose connectors or wiring clamps. Repair or replace any damaged, pinched or chaffed wiring. After market radios or other electrical operated equipment in the cab must be fused close to the power supply. Fire coming from Hydraulic Line Check that all the hose and tube clamps, guards, and cushions are securely fixed in position. If they are loose, they may vibrate during operation and rub against other parts.

This may lead to damage to the hoses, and cause high-pressure oil to spurt out, leading to fire damage or serious injury. Check for oil leaks daily and repair them immediately. Windshield Washer Fluid Use an automotive type washer fluid in the windshield washer system. Never use flammable fluids in the windshield washer system Action if Fire Occurs If a fire occurs, escape from the machine as follows: Do not attempt to move the machine or continue operations. Turn the start switch OFF to stop the engine. Use the handrails and steps to get off the machine. Immediately call for help. When using a fire extinguisher, always aim the extinguisher at the base of the fire.

If an optional fire extinguishing system is in place be finality with it’s operating procedures. Dust Hazard Precautions Dust can be hazardous to your health if inhaled. Komatsu does not use asbestos in its products. There is a danger imitation products may contain asbestos. If you have to handle materials containing asbestos fibers or other dust materials during demolition operations, always do as follows. Never use compressed air for cleaning. Use water to keep down the dust when cleaning. If there is a danger there may be asbestos dust in the air, operate the machine with the wind to your back whenever possible. Use an approved respirator.

Do not allow any other person into the area during operation. PC350LL-7E0 1-19