SAFETY Operations on Slopes When working on slopes, there is a danger that the machine may lose its balance and roll over when the swing or work equipment is operated. This may lead to serious injury or property damage, always provide a stable place when carrying out these type of operations, and work carefully. Do not swing the work equipment from the uphill side to the downhill side when the bucket is loaded. This operation is dangerous, and may cause the machine to tip over. If the machine has to be used on a slope, pile the soil to make a platform that will keep the machine as horizontal as possible.
Operations on Snow Snow-covered or frozen surfaces are slippery, so be extremely careful when traveling or operating the machine, and do not operate the levers suddenly. Even a slight slope may cause the machine to slip, so be particularly careful when working on slopes. Frozen ground becomes soft when the temperature rises which may cause the machine to tip over. If the machine enters deep snow, it may tip over or become buried in the snow. Be careful not to leave the road shoulder or to get trapped in a snow drift. Be alert and careful when clearing snow. The road shoulder and objects buried in the snow beside the road may not be easily seen.
The machine may hit covered objects and tip over. 1-30 PC350LL-7E0