SAFETY Shipping the Machine When shipping the machine on a trailer, do as follows. Investigate all state and local laws governing the weight, width, and length of a load. If necessary, disassemble the work equipment. The width, height and weight of the load differ according to the work equipment, so take this into account when determining the shipping route. When passing over bridges or structures on private land, check first that the structure is strong enough to support the weight of the machine. When traveling on public roads, check first with the relevant authorities and follow their instructions.
If the machine is equipped with the optional cab riser (48 inch and 60 inch tilting riser vs. 15 inch non-tilting riser), tilt the cab into its transportation position before transporting the machine. Additionally, if the shipping conditions require, replace the safety cable with the machine shipping bar before transporting the machine. For details of the shipping procedure, See “TRANSPORTING THE MACHINE” on page 2-131. PC350LL-7E0 1-33