SAFETY Running the Engine during Maintenance To prevent injury, it is not recommended to do maintenance on the machine with the engine running. However, if maintenance must be done with the engine running, perform this work with at least two workers and follow the steps listed below. Always be aware of rotating and moving parts when working on a machine with the engine running. One worker must always remain in the operator's seat and be ready to stop the engine at any time. All workers must maintain contact with the other workers. Set safety lock lever (1) to the LOCK position.
When working near the fan, fan belt, or other rotating parts, there is a possibility of being caught in moving parts, so be extremely careful. Do not touch any control levers. If a control lever must be operated, always give a signal to the other workers to warn them to move to a safe place. Never drop or insert tools or other objects into the fan or fan belt. Proper Tools Use only tools suited to the task and be sure to use the tools correctly. Using damaged, low quality, faulty, makeshift tools or improper use of the tools could cause serious personal injury. 1-38 PC350LL-7E0