Refill Capacities Fluid Recommendations 38 SEBU9064 402F-05 Engine 403F-15 Engines Table 12 Table 15 (1) The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Re- fer to the OEM specifications. Enter the value for the capacity of the External System in this row. (2) The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the ca- pacity of the Total Cooling System in this row. (1) The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Re- fer to the OEM specifications.
Enter the value for the capacity of the External System in this row. (2) The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the ca- pacity of the Total Cooling System in this row. 403F-07 Engine i05339080 Fluid Recommendations Table 13 General Coolant Information NOTICE Never add coolant to an overheated engine. Engine damage could result. Allow the engine to cool first. (1) The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Re- fer to the OEM specifications. Enter the value for the capacity of the External System in this row.
(2) The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the ca- pacity of the Total Cooling System in this row. NOTICE If the engine is to be stored in, or shipped to an area with below freezing temperatures, the cooling system must be either protected to the lowest outside temper- ature or drained completely to prevent damage. 403F-11 Engine NOTICE Frequently check the specific gravity of the coolant for proper freeze protection or for anti-boil protection. Table 14 Clean the cooling system for the following reasons:
Contamination of the cooling system Overheating of the engine Foaming of the coolant (1) The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Re- fer to the OEM specifications. Enter the value for the capacity of the External System in this row. (2) The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the ca- pacity of the Total Cooling System in this row. NOTICE Never operate an engine without water temperature regulators in the cooling system. Water temperature regulators help to maintain the engine coolant at the proper operating temperature.
Cooling system prob- lems can develop without water temperature regulators. 402F-05 Engine Refill Capacities Compartment or System Liters Quarts Engine Only 1.1 1.2 External System Per OEM(1) Total Cooling System(2) 403F-15 Engines Refill Capacities Compartment or System Liters Quarts Engine Only 2.6 2.7 External System Per OEM(1) Total Cooling System(2) 403F-07 Engine Refill Capacities Compartment or System Liters Quarts Engine Only 1.2 1.3 External System Per OEM(1) Total Cooling System(2) 403F-11 Engine Refill Capacities Compartment or System Liters Quarts Engine Only 1.9 2.0 External System Per OEM(1) Total Cooling System(2)