Model 2120 Tractor TM-4252 (Dec-70) General Information 10 Predelivery, Delivery and After-Sales Inspections 10-3 BEFORE DELIVERING TRACTOR - Continued Service Specifications Reference Fill batteries with electrolyte, charge batteries and install in tractor. F®S "Fundamentals of Service, Electrical Systems" manual "Batteries" a undei First connect positive (+) and then negative (-) wire of each battery. Only then start tractor engine.
Section 40, group 10 TIRES AND WHEELS Check tire inflation pressure Operator's manual Retighten wheel bolts and ball nuts Section 80, group 15 and Operator's manual Check crankcase oil level Top mark on dip stick Operator's manual LUBRICATION Check transmission-hydraulic system oil level Operator's manual Lubricate all lubrication points on the tractor Operator's manual ENGINE Check oil bath air cleaner Fill with oil to "Full" Operator's manual Check dry type air cleaner Operator's manual Fill fuel tank and start engine Capacity: 16.25 Imp. (19.5 US) Gals = 73.8 lit.
Operator's manual Check lighting system, indicator lights and instruments for proper operation Operator's manual Check if speed control linkage moves easily Section 20, group 40 Check engine idle speeds Section 20, group 40 Check injection timing Section 30, group 15 TESTING OPERATION Check clutch pedal adjustment Approx. 1 in.
(25 mm) clutch pedal free travel Section 50, group 5 Check operation of HIGH-LOW shift Section 50, group 10 Shift transmission through all speeds Operator's manual Check differential lock operation Operator's manual Check power shaft operation Operator's manual Check 3-point hitch operation Operator's manual Check hydraulic system operation Section 70, group 5 Check brake system Section 60, group 15 Printed in Germany