OPERATION 12.14.4 PRECAUTIONS WHEN DRIVING MACHINE When the machine travels at high speed for a long distance, the tires become extremely hot. This causes early wear of the tires, so it should be avoided as far as possible. If the machine must be driven for a long distance, take the following precautions. ! Follow the regulations related to this machine, and drive carefully. ! Before driving the machine, carry out the checks before starting. ! The most suitable tire pressure, travel speed, or tire type differ according to the condition of the travel surface. Contact your distributor or tire dealer for information. !
The following is a guide to suitable tire pressures and speeds when traveling on a paved surface with standard tires. Tire pressure (front and rear ): 294 kPa (3.0 kg/cmІ, 42.6 psi) Speed: 25 km/h (16-18 mph) ! Check the tire pressure before starting, when the tires are cool. ! After traveling for 1 hour, stop for 30 minutes. Check the tires and other parts for damage; also check the oil and coolant levels. ! Always travel with bucket empty. ! Never put dry ballast in tires when traveling. 2-51