WARNING: For reasons of safety, always follow these safety precautions. SAFETY ! Disassembly, repair, and assembly of tires requires specialist equipment and skill, please ask your specialist tire repair shop to carry out repairs. Failure to carry out inspection and maintenance fully, or failure to check the function of various maintenance locations may cause unexpected problems and may even lead to personal injury or damage, so always do as follows. ! Checks when engine is stopped Have all the inspection and maintenance locations been checked? Have all the inspection and maintenance items been carried out correctly? Have any tools or parts dropped inside the machine?
It is particularly dangerous if they get caught in the lever linkage. ! Checks when engine is running •Do the inspection and maintenance locations work normally? •Is there any oil leakage when the engine speed is raised and load is applied to the hydraulic system? ! Never dump waste oil in a sewer system, rivers, etc. ! Always put oil drained from your machine in containers. Never drain oil directly on the ground. ! Obey appropriate laws and regulations when disposing of harmful objects such as oil, fuel, coolant, solvent, filters, batteries, and others. !
When carrying out maintenance with the work equipment or chassis raised, lock the front and rear frames with the safety lock, always place the levers in the HOLD position then lock the control levers with the safety lock, and block the work equipment and chassis. ! Always fit blocks under the wheels when jacking up the machine. After jacking up the machine, set blocks under it to hold position. 1-34 TIRE MAINTENANCE CHECKS AFTER INSPECTION AND MAINTENANCE WASTE MATERIALS WHEN PERFORMING MAINTENANCE WITH THE CHASSIS RAISED