OPERATION 2. TRANSMISSION CUT-OFF SWITCH WARNING If the machine has to be stared on a slope, always turn the transmission cut-off switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start the machine off slowly. Normally, put this switch in ON position. Position (1) (OFF) Acts as a normal brake (like right brake pedal). Position (2) (ON): Acts as normal brake, but also switches transmission to NEUTRAL. If the switch is ON, the transmission cut-off pilot lamp will light up. 3. WORKING LAMP SWITCH WARNING Always turn the working lamp off before traveling on public roads.
When the working lamps are turned ON, the pilot lamp lights up. Position (1): OFF Position (2): Lights up 4. LAMP SWITCH This is used to light up the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. (1) OFF (2) position: Side clearance lamp, tail lamps, and gauge lighting light up (3) position: Head lamps light up in addition to lamps at г position REMARKS The lamp switch can be operated regardless of the position of the lever. 2-10