OPERATION 11.3 CONTROL LEVERS, PEDAL 1. SPEED CONTROL LEVER This lever controls the travel speed of the machine. This machine has a 4-FORWARD, 4-REVERSE speed transmission. Place the speed control lever into the desired speed range. 1st and 2nd speeds are used for working. 3rd and 4th speeds are used for traveling. Position (1): 1st Position (2): 2nd Position (3): 3rd Position (4): 4th REMARKS The length of the lever can be adjusted to 3 stages (positions A, B, C ). To adjust the length, remove the screw at the bottom of the lever knob, slide the knob to the desired position, then tighten the screw again. (The lever is installed to position B when it is shipped from the factory.) 2-15