OPERATION 12.3 ADJUSTMENT BEFORE OPERATION 12.3.1 OPERATOR'S SEAT WARNING Park the machine in a safe place and stop the engine when carrying out adjustment of the operator's seat. Adjust the seat before starting operations or when changing operators. Check that you can depress the brake pedal fully with your back against the seat backrest. A: Forward-backward adjustment Pull lever (1) up, and move the seat to the desired position, then release the lever to lock in place. For-and-aft adjustment: 160 mm (6.3 in) (16 mm (0.63 in) x 10 stages) B: Adjusting seat angle Pull lever (2) up and push down on the rear of the seat to tilt it backwards.
Push lever (2) down and push down on the front of the seat to tilt it forward. Range of adjustment: 13 E (front tilt, rear tilt: 4 stages each) C: Adjusting seat weight Turn grip (3) to adjust the strength of the suspension. Adjustment range: (Target) 50 kg - 120 kg (110.3 - 264.6 lb) D: Adjusting backrest angle Move lever (4) and move the backrest to the front or rear. Adjustment range: Front 66 E (3 E x 22 stages) Rear 72 E (3 E x 24 stages) NOTICE If the seat back is reclined too far, the seat could back hit the rear glass, so use it in a position where it does not contact the glass. When reclining the seat fully to take a rest , set the seat in the following position.
Fore-and-aft adjustment: Max. front position Up-down adjustment: Max. height Seat angle adjustment: Horizontal or fully tilted Reclining adjustment: Fully tilted backward 36 E (12 stages) 2-32