OPERATION 12.4 OPERATIONS AND CHECKS BEFORE STARTING ENGINE WARNING If the control levers are touched by accident, the work equipment could move suddenly. When leaving the operators compartment, always set the safety lever securely to the LOCK position. Before starting the engine, use a damp cloth to wipe off the dust accumulated on the top surface of the battery or on the starting mortar and alternator. 1. Check that parking brake pedal (1) is at the LOCK position. 2. Check that directional lever (2) is at N position. When starting the engine , if directional lever (2) is not at the N position, the engine will not start. 3.
Lower the bucket to the ground, then check that work equipment control lever (3) is locked by safety lock (4). 4. Insert the key in starting switch (5), turn the key to the ON position, and check that the pilot lamp lights up. 2-36