OPERATION 12.7 MOVING MACHINE OFF WARNING ! When moving the machine off, check that the area around the machine is safe, then sound the horn before starting. Do not allow people near the machine. ! There is a blind spot behind the machine, so be particularly careful when traveling in reverse. WARNING When starting the machine on slopes, set transmission cutoff switch (1) to the OFF position, depress left brake pedal (2) while depressing accelerator pedal (3), then gradually release left brake pedal (2) to allow the machine to start. 1. Check that caution pilot lamp (4) is not lit up. 2. Set safety lock (6) of work equipment control lever (5) to the FREE position. 3.
Operate work equipment control lever (5) to set the work equipment to the travel posture shown in diagram on right. 2-40