OPERATION 12.11 STOPPING MACHINE WARNING ! Avoid stopping suddenly. Allow ample room when stopping. ! Do not park the machine on slopes. If the machine has to be parked on a slope, set it facing directly down the slope, then dig the bucket into the ground and put blocks under the tires to prevent the machine from moving. ! If the control lever is touched by accident, the work equipment or the machine could move suddenly, and cause a serious accident Before leaving the operators seat always set the safety lock lever securely to the LOCK position. ! Even if the parking brake pedal is depressed LOCK, for safety precaution keep the brake pedal depressed until the pilot lamps lights up.
NOTICE Never use the parking brake switch to brake the machine when traveling except in an emergency. Apply the parking only after the machine has stopped. 1. Release accelerator pedal (1), and depress brake pedal (2) to stop the machine. 2. Place directional lever(3) in N (neutral). 3. Depress parking brake pedal (4) to LOCK to apply the parking brake. 2-44