OPERATION OPERATION 1. Before starting the engine, check that fuel control lever (1) is at the low idling position. 2. Pull fuel control lever (1) to a position midway between the low idling and full speed positions. 3. Insert the key into starting switch (2) and turn the key to the ON position. 4. Carry out preheating. There are the following two ways of carrying out preheating. First use the convenient automatic preheating system. For operating method, see the section of "AUTOMATIC PREHEATING (PAGE 3-63)" and "MANUAL PRE- HEATING (PAGE 3-64)". 3-62