OPERATION OPERATION GAUGE PANEL SPEC. NOTICE Do not start the engine with the fuel control lever near the FULL position. There is danger that this will damage the engine parts. Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine fails to start, repeat steps 2 and 3 after waiting for about 2 minutes. 1. Before starting the engine, check that fuel control lever (1) is at the low idling position. 2. Pull fuel control lever (1) to a position midway between the low idling and full speed positions. 3. Insert the key into starting switch (2), turn the key of start- ing switch (2) to the HEAT position and hold it until glow signal (3) glows red. 3-65