PRECAUTIONS FOR OPERATION SAFETY PARKING MACHINE Park the machine on firm, level ground. Select a place where there is no hazard of falling rocks or landslides, or of flooding if the land is low. Lower the work equipment completely to the ground. When leaving the machine, set the steering, directional and gear shift levers in the N (Neutral) position and set the blade lever in the holding position, then apply safety lock lever (1) and brake lock lever (2) and stop the engine. Always close the operator's cab door, and use the key to lock all the equipment in order to prevent any unauthorized person from moving the machine.
Always remove the key, take it with you, and leave it in the specified place. If it is necessary to park the machine on a slope, always do as follows. Set the blade on the downhill side, then dig it into the ground. Put blocks under the tracks to prevent the machine from moving. 2-22