OPERATION EXPLANATION OF COMPONENTS ENGINE WATER TEMPEARTURE GAUGE This gauge (2) indicates the cooling water temperature. When the indicator is in the white range during operation, the water temperature is normal. If the indicator moves from the white range into the red range during operation, stop the machine immediately, run the engine under no load at a midrange speed, and wait for the indicator to go down to the white range. After starting the engine, warm up it until the indicator moves into the white range. TRANSMISSION OIL TEMPERATURE GAUGE This meter (3) indicates the temperature of the transmission lubricating oil.
When the indicator is in the white range during operation, the oil temperature is normal. If the indicator moves from the white range into the red range during operation, stop the machine, run the engine under no load at a midrange speed, and wait for the indicator to go down to the white range. FUEL GAUGE When the starting switch is turned ON, this meter (4) displays the amount of fuel remaining in the fuel tank. F indicates a full tank. When the indicator points to E, it indicates that there is less than 43 liters (11.35US gal) remaining, so add fuel. Always fill the tank after finishing operations.
ENGINE WATER TEMPERATURE CAUTION LAMP This lamp (5) warns of a rise in the temperature of the engine cooling water. If the lamp lights up, stop the machine, run the engine under no load at a midrange speed, and wait for the indicator of the engine water temperature gauge (2) to go down to the white range. 3-7