Basic components EMU26400 Top cowling release lever The top cowling can be removed by operat- ing the cowling release lever. Pulling the front lever unlocks the top cowling for remov- al. 3 1 2 B A ZMU02525 1. Trim tab 2. Bolt 3. Cap When installing the top cowling: 1. Set the top cowling straight down onto the engine, being careful to avoid catch- ing spark plug wires or other wires. 2. Align the three cowling hooks with the locks on the bottom cowling. 3. Press down on the top of the cowling at the front and both sides of the back until the three locks click.
ZMU03518 A B ZMU01863 EMU26340 Tilt support lever for power trim and tilt or hydro tilt model To keep the outboard motor in the tilted up position, lock the tilt support lever to the clamp bracket. 1 ZMU03519 4. To make sure the cowling is locked properly push the cowling from each side. If it lifts, repeat step 3. ZMU03979 ECM00070 CAUTION: 1. Tilt support lever G Make sure the cowling lock connection 15