Oil Pan Oil Filter Tightning Specifications for Oil Pan (1) ............................................................Oil Pan Tightening Specifications for Oil Filter (1) Wipe clean the filter adapter in the area that the new filter makes contact. Put clean engine oil on the new filter gasket. Install filter until contack is made the tighten 3/4 turn more. (2) Torque for Plug....................... 45 N· m (33 lb· ft) (4) Torque for ten bolts................. 25 N· m (18 lb· ft) (5) Torque for two nuts.................
25 N· m (18 lb· ft) Oil Pump (2) Torque for adapter is ................................54 ± 14 N·m (40 ± 10 lb·ft) Tightening Specifications for Oil Pump to Main Bearing Cap Bolt (1)...........................................................Oil Pump (2) Torque for bolt ...................... 90 N· m (66 lb· ft) G643 (E) Service Manual Chapter 3. Engine Mechanical System 34