Komatsu — CRUSHING OR CUTTING PREVENTION

. SAFETY GENERAL PRECAUTIONS to stop it. 2 - 13 HANDRAILS AND To prevent per sonal injury caused by slipping or falling off the machine , always do as follo Use the part s marked by arrows in the diagr am when gettin g on or off the machine. A: For getting on or off machine using left door B: For getting on or off machine using right door To ensure safety, always face the mac hine and maintain three-point c one foot) wit yourself. ontact (both feet and one hand , or both hands and h the handrails and steps to ens ure that you support Do not grip t he dump lever when getting on or off the machine. Never climb on the engine hood or covers where there are no s.

g on or off the machine, check the handrails and non-slip pad Before gettin and steps, and if immediately loose bolts. there is any oil, grease, or mud on them, wipe i t off . In addition, repair any damage and tighten any any Do not get o n or off the machine while holdin g tools in your hand. MOUNTING AND Never jump on or off the machine. Never g et on or off a moving If the machin e starts to move when there is no operator on the machine, do not jump on to the machine and try CRUSHING OR CUTTING PREVENTION anges, it will lead to serious personal injury. culation range. If the cleara nce at the articulating portion ch anges, it will lead t o serious personal injury.

Do not allow anyone to come inside the arti culation range. The clearan ce in the area around the dump body changes a ccording to the movement of the dump body. If you are caught, you will suffer serious injury. D o not allow anyone near any of the rotating o r telescoping parts.