ENGINE HG2 20 Model 6CTA8.3-C215 Type Vertical, in-line, water-cooled, 4 strokes Aspiration turbocharged aftercooling No.
of cylinders 6 Bore 114 mm Stroke 135 mm Piston displacement 8.3 L Horsepower - Gross 160kW/2,200rpm Maximum torque 908Nm/1,500rpm Torque rise 31% Air cleaner Dry type Electrical 28V，70A Battery 12V*2；900cca TRANSMISSION AND TORQUE CONVERTER HG22 0 Speed (at rated engine speed) Forward / Reverse (km/h) 1st 6.88/6.88 2nd 11.85/15.65 3rd 15.65/33.45 4th 26.68 5th 33.45 6th 52.74 TANDEM DRIVE H G220 Oscillating welded box section 614*225 mm Side wall thickness Inner 22 mm Outer 22 mm Whell axle spacing 1,535.4 mm Tandem oscillation ±13 ° FRONT AXLE HG22 0 Type Solid bar construction welded steel sections Ground clearance at pivot 610 mm Wheel lean angle, right or left ±17 ° Oscillation, total 32 ° REAR AXLE Alloy steel, heat treated, full floating axle with lock/unlock differential NO-SPIN differential STEERING HG22 0 Hydraulic power steering providing stopped engine steering meeting ISO 5010 Hydraulic power steering Minimum turning radius 7.3 mm Maximum steering range, right or left 49 ° Articulation ±26 °