Komatsu — GENERAL PRECAUTIONS

1 GENERAL PRECAUTIONS A WARNING: For reasons of safety, always follow these safety precautions. When carrying out the above operations, make sure to keep all persons other than the operator outside the range of falling or flying objects. Be particularly sure to maintain a proper dis- tance when carrying out shear operations. (A): FOPS (B) Front guard Level 2 acceptance is intended for protection from large fall- ing rocks, flying objects and other debris encountered in oper- ations such as demolition work, building constructions and general heavy site work. Level 2 Guards o Fops fitted directly to the revolving frame o Front guard fitted directly to front of the fops NOTE:

The above guards are the minimum required for typical working conditions as described above and are in accordance with the latest requirements of ISO/DIS 10262 (draft standard). PRECAUTIONS FOR ATTACHMENTS 0 When installing and using an optional attachment, read the instruction manual for the attachment and the information related to attachments in this manual. 0 Do not use attachments that are not authorised by Komatsu or your Komatsu distributor. Use of unauthorised attachments could create a safety problem and adversely affect the proper operation and useful life of the machine.

0 Any injuries, accidents, product failures resulting from the use of unauthorised attachments will not be the responsibility of Komatsu. MACHINES WITH ACCUMULATOR On machines equipped with an accumulator, for a short time after the engine is stopped, the work equipment will lower under its own weight when the work equipment control lever is shifted to LOWER. After the engine is stopped, set the safety lock lever to the lock position (and also lock the attachment pedal with the lock pin). When releasing the pressure inside the work equipment circuit on machines equipped with an accumulator, follow the procedure given in the inspection and maintenance section.

Method of releasing pressure see “HANDLING THE ACCUMULATOR” on page 90. The accumulator is filled with high-pressure nitrogen gas, and it is extremely dangerous if it is handled in the wrong way. Always observe the following precautions. 20