SAFETY A WARNING: For reasons of safety, always follow these safety precautions. 8. PRECAUTIONS FOR MAINTENANCE 8.1 BEFORE CARRYING OUT MAINTENANCE If others start the engine or operate the controls while you are performing service or lubrication, you could suffer serious injury or death. ALWAYS attach the WARNING TAG to the control lever in the operator’s cab to alert others that you are working on the machine. Attach additional warning tags around the machine, if necessary. DO NOT operate When this plate is not being used keep it in the storage compartment. 05963- J + These tags are available from your distributor. (Part No. 09963-03000) PROPER TOOLS + Use only tools suited to the task.
Using damaged, low quality, faulty, or makeshift tools could cause personal injury. STOP THE ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE + Always stop the machine on firm flat ground and stop the engine before OFF carrying out inspection and maintenance. ACC ‘.. .I ON + If it is necessary to run the engine when carrying out maintenance, such “\. : .... : / .., j / as when cleaning the inside of the radiator, place the safety lock lever in the LOCK position and carry out the operation with two workers. + One worker should sit in the operator’s seat so that he can stop the engine immediately if necessary. He should also be extremely careful not to touch any lever by mistake.
Touch the levers only when they have to be operated. + The worker carrying out the maintenance should be extremely careful not to touch or get caught in any moving parts. 1-16