11.3.2 WORK LIGHT SWITCH This switch is a three position push pull type switch. 1. With the switch in the first position, all the lights are off. 2. With the switch pulled to the second position, the front work lights, the instrument panel gauge lights and the instrument panel illumination light are energized. 3. With the switch pulled to the third position, the front and rear work lights, the instrument panel gauge lights and the instru- ment panel illumination light are energized. REMARK The lighting circuits can be operated with the starting key switch in OFF position and master disconnect switch in the ON position. 11.3.3 HORN SWITCH Depress the switch to sound the horn.
I 11.3.4 ETHER START SWITCH This switch controls the ether injector for cold weather starting, see 12.2.2 COLD WEATHER STARTING on page 2-32. ETHER i STRRT 6 11.3.5 ELECTRICAL SYSTEM MASTER SWITCH Turn the key clockwise to connect the battery ground circuit. Turn the key counterclockwise to disconnect the battery ground circuit. REMARK Keep the switch on while the engine is running. 2-l 0